Natural milled mineral grades with controlled particle size distribution

Ground Calcium Carbonate (GCC)

Milled directly from selected crystalline limestone using ceramic-lined ball mills and multi-rotor air classifiers to ensure supreme whiteness and low abrasion.

≥98.0%
CaCO₃ Assay
325
Sieve Mesh
≥96.5%
Whiteness Index
<0.20%
Moisture Ratio
Ground Calcium Carbonate (GCC) CAS: 1317-65-3 CaCO₃
Ground Calcium Carbonate (GCC)

Available in 25kg / 50kg PP woven sacks with moisture barrier and 1,000kg / 1,200kg heavy bulk containers.

High Loading Low Oil Absorb Fast Dispatch
MINERAL ENGINEERING EXCELLENCE

Mechanical Micro-Milling & Aerodynamic Air Classification

Ground Calcium Carbonate (GCC), commonly known as micronized calcite powder, is produced through multi-stage mechanical pulverization of natural crystalline limestone followed by precision air classification to yield calibrated particle size distributions.

01

Selective Quarry Crushing

High-purity crystalline white limestone rocks are hand-sorted and crushed through multi-stage jaw and cone crushers to eliminate colored impurities and produce clean, uniform mineral feed.

Limestone Rocks → Optical Sorting → Clean Feed
02

Micro-Pulverization

Mineral feed is continuously pulverized in advanced roller and ball mills equipped with high-density alumina ceramic linings to prevent iron contamination and preserve natural 96.5%+ whiteness.

Ceramic Lining • Zero Fe Contamination
03

Turbo Air Classification

Aerodynamic dynamic air classifiers isolate exact particle top-cuts (D97) and median diameters (D50) from 300 Mesh up to 2500 Mesh, guaranteeing zero gritty oversize particles.

Exact D50 • D97 Top-Cut Control

Formulator Selection Guide: GCC vs PCC

Understand the distinct chemical, physical, and economic advantages of Ground vs Precipitated Calcium Carbonate.

High Loading • Cost-Efficiency
Characteristic BBCL Ground Calcium (GCC) Precipitated Calcium (PCC) Compounder Advantage
Origin & Structure Natural Crystalline Calcite Rock Synthetic Chemical Precipitation Natural density, low specific surface area
Oil Absorption (DOP) Low (14 – 18 g / 100g) High (28 – 38 g / 100g) Allows much higher filler loading without stiffening resin melt
Maximum Loading Ratio Up to 70% – 80% (Masterbatches, PVC) 15% – 35% (Specialty Reinforcement) Substantial cost reduction per metric ton of polymer output
Specific Gravity & Bulk Density High (2.70 – 2.72 g/cm³) Medium (2.50 – 2.65 g/cm³) Excellent gravity feeding and compaction in twin-screw extruders
Whiteness Index (ISO) 96.0% – 97.5% Natural Brightness 98.0% Chemical Pure White High natural brightness suitable for colored and opaque compounds
Primary Formulation Role High-Tonnage Extender & Rigidity Modifying Filler Impact Modifier, Oral Care & Active Reinforcement Highest cost performance in pipes, masterbatches, and paints
PRODUCT GRADES

Specialized GCC Product Grades

From natural untreated micro-powders to surface-activated hydrophobic grades and ultrafine slurries.

Grade A: Natural Pure Hydrophilic

Natural Micronized Uncoated GCC

Untreated ultra-pure crystalline calcite powder with natural polar characteristics. Easily wetted in aqueous dispersion systems and cost-effective functional filling.

Emulsion Paints & Coatings: Excellent dry hiding opacity and Titanium Dioxide (TiO₂) spacing.
Paper & Cardboard: Alkaline wet-end filler increasing sheet brightness and opacity.
Tile Adhesives & Putty: Crack-resistant bodying agent with smooth troweling viscosity.
Ceramics & Glass: Fluxing agent and thermal expansion stabilizer.
Mesh: 300 to 1250 Mesh
Grade B: Activated Coated Hydrophobic

Stearic Acid Surface-Coated GCC

Micronized calcite powder hot-treated with an active monomolecular stearic acid layer. Disperses seamlessly into non-polar polymer melts with minimal extruder friction and zero agglomerates.

Rigid PVC Pipes & Conduits: High impact strength, smooth extrusion, low tool wear.
Polymer Masterbatches (PE/PP): Ultra-high filler loading up to 80% without die build-up.
Cables & Insulation Compounds: Dielectric stability and smooth surface finish.
EVA Footwear & Soles: Uniform microcellular foam structure and rebound resilience.
Mesh: 400 to 2500 Mesh
Grade C: Ultrafine D50 ≤ 2.0 µm

Ultrafine Micronized / WGCC

Superfine sub-micron particle fraction engineered for demanding surface finishes, glossy printing coatings, and precision industrial adhesives.

High-Gloss Paper Coating: Imparts high sheet gloss, smoothness, and uniform ink holdout.
Printing Inks & Toners: Smooth rheology, high pigment transfer, and anti-misting.
Polyurethane & Epoxy Adhesives: Controlled thixotropic index and gap-filling strength.
Automotive Underbody Coatings: Chip resistance, sound deadening, and elasticity.
Mesh: 1250 to 2500 Mesh
CERTIFIED LABORATORY PROFILE

Chemical & Physical Specifications

Tested rigorously in our Sreemangal quality control laboratory in accordance with international ASTM, ISO, and Pharmacopoeial standards.

Parameter / Property Standard Specification Test Method / Reference Commercial Significance
CaCO₃ Content 98.1 % ASTM C25 Chemical Properties (Min/Max: >= 97.0)
MgCO₃ Content 0.85 % ASTM C25 Chemical Properties (Min/Max: <= 1.50)
Fe₂O₃ Content 0.04 % Spectrophotometry Chemical Properties (Min/Max: <= 0.08)
Acid Insoluble Matter 0.18 % Gravimetric Chemical Properties (Min/Max: <= 0.35)
Whiteness 95.5 % ISO 2469 Physical Properties (Min/Max: >= 94.0)
Moisture Content 0.15 % Oven @ 105°C Physical Properties (Min/Max: <= 0.30)
pH Value 8.7 - Electrometric Physical Properties (Min/Max: 8.0 - 9.2)
Bulk Density 0.85 g/cm³ ISO 787-11 Physical Properties (Min/Max: 0.75 - 0.95)
Oil Absorption (Linseed Oil) 18.5 g/100g ASTM D281 Physical Properties (Min/Max: 16 - 22)
Residue on 45μm (325 mesh) 0.01 % ISO 787-7 Particle Size (Min/Max: <= 0.05)
Top Cut (d98) 18 μm Laser Diffraction Particle Size (Min/Max: <= 25)
SECTORS & APPLICATIONS

8 Target Industries Driven by BBCL GCC

Delivering critical mechanical reinforcement, thermal conductivity, and cost optimization to leading manufacturers across Bangladesh.

PVC Pipes & Profiles

Coated GCC increases flexural modulus, pipe ring stiffness, and dimensional stability while drastically cutting raw resin cost per running meter.

Grade: Coated 400–800 Mesh

Plastics & Masterbatches

High loading capability (up to 80% in PE/PP filler masterbatches). Improves thermal conductivity, cycles times, and anti-fibrillation in raffia tape.

Grade: Coated 800–1250 Mesh

Paints & Coatings

Functions as an economical prime pigment extender. Enhances scrub resistance, dry-film build, gloss control, and weather durability.

Grade: Natural 400–1250 Mesh

Rubber & Footwear

Enhances compound hardness, tear resistance, and modulus in shoe soles, EVA sheets, conveyor belting, and automotive rubber components.

Grade: Coated 600–1250 Mesh

Paper & Paperboard

Widely utilized as alkaline wet-end filler. Delivers high sheet opacity, ink absorption, brightness, and smooth printing surfaces.

Grade: Natural 600–1250 Mesh

Adhesives & Putty

Provides structural volume, rheology control, and sag resistance in tile adhesives, wall putties, joint fillers, and elastomeric sealants.

Grade: Natural 300–600 Mesh

Cables & Insulation

Stearic acid coated GCC ensures smooth sheath extrusion, flame-retardant filler support, and superior dielectric insulation properties.

Grade: Coated 800–1250 Mesh

Agrochemicals & Feed

Clean natural mineral calcium source for poultry/animal bone and eggshell development, as well as agricultural soil acidity conditioning.

Grade: Natural 300–400 Mesh
SUPPLY CHAIN & PACKAGING

Industrial Packaging & Bulk Logistics

Multi-tier packaging formats tailored for manual handling or high-throughput automated pneumatic silos.

25kg & 50kg Heavy-Duty Bags

PP Woven Bags with Inner Polyethylene Moisture Barrier

Standard commercial packaging for factories with manual or semi-automated batch feeding. Completely sealed to block ambient humidity and atmospheric contamination during monsoon transport.

Palletized or Loose Stacking High-Burst Strength Color-Coded Grade Labels

1,000kg FIBC Bulk Jumbo Bags

High-Capacity Industrial Bulk Big-Bags with Discharge Spouts

Engineered for large-scale PVC pipe manufacturers and masterbatch compounders with automated silo storage. Features top filling spouts and bottom discharge chutes for zero-dust decanting.

Dust-Free Discharge Chute Forklift 4-Loop Lifting Direct Silo Integration
Mobile Scan
Scan BBCL Website QR

British Bangla Chemical

Scan to view on your phone